AWT’s PIM Analyzers are ideal for production and laboratory. These instruments are very accurate, yet highly reliable and built for true continuous 24/7 operation. The complete system consists only of one unit, making set-up easy and operation convenient.
With the introduction of new wireless technologies like LTE, and LTE-A, network operators demand RF components that offer excellent PIM characteristics. AWT’s PIM Analyzers are well suited for this task. With -172dBc sensitivity, our analyzers detect all PIM issues of tested RF components. Engineers appreciate the high accuracy over 100% of the IM measurements.
Image shown: Single Band PIM test system upgraded to Dual Band
Data Sheet Sales Offices eContact us
Features
-
Precision PIM Analyzer for production and laboratory.
-
True 24/7 operation.
-
3 Measurement modes: PIM Analyzer, PIM over Time, PIM over Frequency (Frequency Sweep).
-
Forward and reverse PIM measurements ( 2-port).
-
Upgrade to dual-band possible.
Passive Intermodulation (PIM) analyzers measure the amount of unwanted intermodulation signals, generated by passive components. Increasing demand for data bandwidth mandates optimally performing, high quality network elements. Wireless carriers use exclusively high quality low PIM components to ensure optimal performance of their networks – today and in the future.
PIM is caused by RF components that show non-linear frequency behavior. Even the most careful production process can introduce PIM. Therefore, every single component has to be tested. It is paramount for manufacturersto minimize PIM during both, the design phase and the production process.
RF Components that may cause PIM:
-
Cables
-
Connectors
-
Antennas
-
Attenuators, Loads
-
Surge Protectors
-
Filters, Diplexers, Duplexers
-
Combiners, Splitters, Couplers
Order Number
|
Model Number / Type
|
Tx Frequency (MHz)
|
Rx Frequency (MHz)
|
|
PS2M400 |
TETRA 400 |
390 ~ 400 |
380 ~ 385 |
|
PS2M400E |
E-TETRA400 |
420 ~ 430 |
410 ~ 412 |
|
PS2M850 |
AMPS/CDMA 850 |
869 ~ 896 |
824 ~ 851 |
|
PS2M900 |
GSM900 |
935 ~ 960 |
890 ~ 915 |
|
PS2M900E |
EGSM900 |
925 ~ 960 |
880 ~ 915 |
|
PS2M1500JP |
LTE-JP1500 |
1488 ~ 1520 |
1456 ~ 1480 |
|
PS2M1800 |
DCS/GSM1800 |
1805 ~ 1880 |
1710 ~ 1785 |
|
PS2M1900 |
PCS1900 |
1930 ~ 1990 |
1850 ~ 1910 |
|
PS2M2100AWS |
AWS |
2010 ~ 2155 |
1710 ~ 1755 |
|
PS2M2000TD |
TD-SCDMA(2000) |
2010 ~ 2025 |
1900 ~ 1920 |
|
PS2M2100UMTS |
UMTS/W-CDMA |
2110 ~ 2170 |
1920 ~ 1980 |
|
PS2M2160JP |
W-CDMA-JP |
2150 ~ 2170 |
2110 ~ 2140 |
|
PS2M2600LTE |
IMT-E(2600) |
2620 ~ 2690 |
2500 ~ 2570 |
|
PS2MWBKR |
WiBro-KR |
2110 ~ 2170
2300 ~ 2390 |
1910 ~ 1990 |
Accessories
|
|
PACC2 |
Accessory Kit: low PIM cable 3m / 10ft, low PIM load 50/10W, PIM <-165 dBc @ 2*43dBm, 690-2800 MHz, (4) adapters, torque wrench with hard carry case. |
|
PACC2L |
Accessory Kit: low PIM cable 3m / 10ft, low PIM load 100W, PIM <-165dBc @ 2*43dBm, 380-2800 MHz, (4) adapters, torque wrench with hard carry case |
|
PLOAD100 |
Low PIM Load 100W, PIM < -165 dBc @ 2*43W, 690-2800 MHz, DIN 7/16 (f) |
|
PLOAD100L |
Low PIM Load 100W, PIM < -165 dBc @ 2*43W, 380-2800 MHz, DIN 7/16 (f) |
|
PIMGEN |
PIM Source: Generator with preset PIM value -80dBm (+/-10). Quick system test. Ideal for test and training. |
|
LIC308DMDM-1M |
Low PIM cable 1m (3ft), PIM < -165dBc @ 2x43dBm, DIN(m)-DIN(m) |
|
LIC308DMNM-1M |
Low PIM cable 1m (3ft), PIM < -165dBc @ 2x43dBm, DIN(m)-N(m) |
|
ADA-DMDF |
Connector Saver. Adapter DIN(m)-DIN(f), PIM <-165 dBc @ 2×43 dBm |
Specifications
Transmitter
|
|
Carrier Power |
+20 to +44 dBm (46 dBm optional) |
|
Power Accuracy |
+/- 0.35 dB |
|
Frequency Accuracy |
2 ppm |
|
Reverse Pwr. Protection |