|
Finger strip gasket or (spring) finger contact strip are usually manufactured from beryllium copper foil. Gasket profiles are resilient / compliant and can provide very low contact resistance between mating faces providing excellent EMI shielding performance. Profiles are available that are capable of coping with comparatively large variations in seam (gap) width. Very low closure force sections fabricated from light gauge foil are available.
One key benefit of finger strip is that ‘D’ or curved profiles may be used in applications where there is a wiping or shear action on the gasket e.g. sliding door.
Various plated finishes are available (e.g. tin, zinc, nickel) that can improve electrical contact properties, corrosion resistance, or improve wear characteristics.
Most sections are based around a ‘D’ profile. There are multiple variants in terms of size (profile height), design features, and mounting methods. Most commonly these include, self adhesive, clip on, rivet mount, slot mount or solder in place.
We have some sample profile drawings below or a more comprehensive list can befound here.
Design considerations/features
Finger strip sections are generally only suitable for indoor or controlled environments unless used inboard of suitable environmental protection.
As most sections are rivet mount or ‘clip on’ they lend themselves to efficient assembly on most sheet metalwork enclosures
They offer potentially very high shielding performance particularly if used in knife edge / channel configuration
Ideally suited for application where covers, doors etc are repeatedly opened and closed, particularly if there is a shearing or wiping action applied. This effect is useful as it ensures that contact faces are maintained in a clean condition
Sections exhibit excellent recovery – very low compression set
Be careful not to mount finger some strip sections in locations where it might be vulnerable to damage. For example, surface mounted fingers can be ‘snagged’ by clothing in doorways or access hatches
Applications
Typically used on 19” rack assemblies, communications cabinets, high performance screened enclosures
Single fingers or strip sections can be used for grounding or connection points
Sample Profiles
General Purpose Contact Strip
 |
FCS GP001 PSA mount fingerstrip |
|
|
FCS GP002 PSA mount fingerstrip |
|
|
FCS GP003 rivet/screw mount large enclosure fingerstrip |
|
|
FCS GP004 Dome top contact strip (Large) |
|
|
FCS GP005 Dome top contact strip (Medium) |
|
|
FCS GP006 PSA mount fingerstrip |
|
|
FCS GP007 PSA mount fingerstrip |
|
|
FCS GP008 PSA mount fingerstrip (Large) |
Twisted Finger Contact Strip
|
|
FCS TF003 PSA mount twisted fingerstrip |
Track Mount Contact Strip
|
|
FCS TM002 Strip track mount contact strip |
|
|
FCS TM002 Track for FCS TM002 Strip |
|
|
FCS TM003 Strip track mount contact strip |
|